Guide

What conference registration staff do: before, during and after doors open

What check-in staff do at a conference or corporate event, the profile asked for, how desks are organised for the arrival rush and the mistakes to avoid.

6 min readBy SOMOS DER

At a conference or a corporate event, the first impression doesn't come from the stage: it comes from the registration desk. If the queue moves, the event starts well. If it gets stuck, the first talk starts with half the room empty. This guide explains what registration (check-in) staff do, what profile is wanted and how the work is organised so opening doesn't become a bottleneck.

What registration staff do

Registration staff confirm that whoever arrives is registered, validate their access and hand over the badge for their category. At the door you get attendees with QR codes, speakers in a hurry, sponsors coming in early to set up their stand, press, last-minute guests and people who registered with another email.

That's why the work divides into three moments.

Before opening

  • Arrive before anyone else. Registration staff are usually called in well ahead of doors opening to set up the desk.
  • Set up the desk: devices charged, connection tested, badges sorted, signage for each queue.
  • Do the trial run: scan or look up several real people from the list and check the system responds properly.
  • Go over the categories and which areas each one can enter, and know who to call with a question (coordination, the client's organisers).
  • Check in those who enter early: exhibitors, sponsors, technical crew and in-house staff.

During the rush

  • Receive, validate and hand over without chatting too much: a short greeting, scan or search, badge, a direction for where to go.
  • Send exceptions to the right desk, instead of solving them in the main queue.
  • Tell coordination if the queue grows faster than it shrinks, so people can be moved from another post.
  • Protect the data: the list has names, companies and emails. Don't leave the screen visible or show the list to anyone.

After opening

  • Keep a reduced desk for late arrivals or people coming between sessions.
  • Reprint or replace lost badges.
  • Close the desk: return equipment and give coordination the day's notes (people not on the list, system problems, complaints).
  • At multi-day events, day two is different: most people already have their badge and the work becomes control and exceptions.

The profile asked for

  • A friendly, firm manner. Registration staff say no many times a day without starting an argument.
  • Speed and accuracy to find a name, read an ID or spot a wrong category.
  • Comfort with phones, tablets or computers, because almost all registration systems are digital.
  • Calm at the rush. The queue puts on pressure, and the typical rush mistake is hurrying and handing over the wrong badge.
  • Languages, if the conference hosts people from abroad: English, and sometimes Portuguese.

If you want to do this work, experience in reception, customer service or sales counts a lot. What event work is like and how you get paid covers the basics of the trade.

How desks are organised at the arrival rush

Most conference attendees arrive in the hour before the first talk. That peak, not the total number of registrations, is what determines how many desks you need. The key is to separate tasks:

  1. Scanning desks for people with their QR code or on the list. This is the fast lane.
  2. An exceptions desk: the person who didn't register, who used another email, whose phone died. If these cases are handled in the fast lane, they hold up the whole queue.
  3. A printing and hand-out desk, if badges are printed. The printer sets its own pace, and it's best not handled by the same person who scans.
  4. A desk for special categories (speakers, press, sponsors), so they don't wait in the general queue.
  5. One person in the queue, who keeps it orderly, asks people before they reach the desk whether they have their QR code ready and sends exceptions to the right place.

How to measure the pace instead of guessing

There's no number of check-ins per minute that works for every event: it depends on the system, whether badges are printed, how many exceptions come up and each person's experience. What you can do is measure it:

  • At the trial run, time several real check-ins from start to finish (from when the person reaches the desk until they leave with the badge) and take the average.
  • Separate the times: one for people with a QR code, another for an exception. They're usually very different.
  • With the pace per desk and the number of people you expect in the peak hour, you calculate how many desks you need so the wait doesn't exceed what you want. PASE has an access point calculator that does this maths and uses paces measured at real events as a starting point.

The full calculation, desk by desk, is in how many staff for an event.

Common mistakes

  • Mixing exceptions with the fast lane. A single complicated case holds up everyone behind.
  • Skipping the trial run. The connection or printer problem appears exactly when the doors open.
  • Calling staff in at opening time. Registration staff have to have the desk set up before the first attendee arrives.
  • Sizing by registrations instead of the peak. A thousand registrations spread over the day aren't the same as a thousand in one hour.
  • Not defining who decides. When a guest isn't on the list, registration staff need to know who to ask, not improvise.

The tool matters too

Before adding people at the door, look at the system. PASE is the QR check-in tool from the same ecosystem as LABURO: each attendee registers beforehand through a link for their category and receives a unique QR code by email. At the door it's scanned with a phone camera or a reader, the system responds whether the access is valid, duplicated or unauthorised, and the badge can be printed right there. It has name search for people who arrive without a QR code and a live report of how many people each door processes.

How it's covered in LABURO

In LABURO, Registration staff is one of the roles in the catalogue, within access and check-in, along with access control, scanner or ticketing operator, wristbands and credentials, door security and cloakroom.

  1. The event is created and the LABURO team builds the team with people from a pool of more than 1,200 profiles.
  2. Each person receives the offer with pay and hours, including the call time, which for registration is earlier than opening.
  3. The person accepts it with one click from their phone and is confirmed for that event.

If registration is part of a bigger team, read conference and convention staff, and for the welcome once guests are inside, corporate event hostess and reception.

Looking for event work in Argentina?

LABURO is the event staffing platform built by SOMOS DER in Buenos Aires, and joining the pool is free. You choose your role and area, and offers reach you with pay and hours before you decide. If you live in Argentina and want to know how to sign up, write to us on WhatsApp.

FAQ

What people ask us most.

What does registration staff do at a conference?

They receive each attendee at the entrance, confirm they're registered, validate their access and hand over the badge for their category (attendee, speaker, sponsor, press or staff). They also handle the exceptions: people who aren't on the list, who registered with another email or who lost their badge. They're the first person from the event that each attendee sees.

What profile is required to work in event registration?

A manner that's friendly and firm at the same time, neat handwriting or good phone skills, speed at finding a name on a list and calm when the queue grows. Experience in reception or customer service helps, and at international conferences, being able to work in English. Punctuality is non-negotiable: registration staff arrive before anyone else.

How many registration staff do I need for a conference?

It depends on how many people arrive in the peak hour and how many people per minute each desk processes with your system. You measure that pace at the trial run, timing several real check-ins, and from there you calculate how many desks you need so the queue doesn't exceed the wait you're aiming for. The full calculation is in the guide on how many staff you need for an event.

How are registration desks organised at the arrival rush?

By separating tasks: scanning desks for people with a QR code, a separate desk for exceptions and, if badges are printed, someone dedicated to printing and handing them out. Special categories (speakers, press, sponsors) are best handled at their own desk so they don't wait in the general queue.

How do I hire registration staff with LABURO?

LABURO operates in Argentina and the platform is in Spanish. You tell the LABURO team how many registration staff the conference needs, and it puts the door team together with people from your area. Each person receives the offer with pay and hours, accepts it with one click from their phone and is confirmed for that event. Write to us on WhatsApp to find out how to get started.

LABURO

Real staff,
for your event.

LABURO is the event staffing platform built by SOMOS DER, an event production company in Buenos Aires, Argentina. If you are planning an event in Argentina or want to know how it works, write to us.